The News at Old Wharf Dory

2/6/25

Just added to the Shop Store!!

2025 Old Wharf T-shirts, all sizes available.

Myerchin Captain’s Folding rigging knife, white bone handle.

Old Wharf Hats, washed red and red&white trucker.

Limited stock on the knife and hats, so don’t delay!

2/4/25

Had a great time at the Boat Builder’s Show on Cape Cod, met a lot of good people and old friends. I did sell my last Boye Yellow Sheepsfoot folder, probably one of the best boat knives out there. I have more on order, but is might be a while. I do have one Blue Pointed Tip folder left.

1/10/25 - Just got in a shipment of Ritchie Rowing Compasses, so I have plenty available for your next rowing adventure.

8/7/24—1/6/25

Myerchin Knives!!

Just added to the Shop Store, Myerchin rigging knives, one fixed blade Generation 2 Pro Wood Offshore System and one Generation 2 Captain folding knife. These are great boating knives, reasonably priced. More info on the Myerchin web site, but don’t get stuck there…

9/24/24- the Generation2 folder is back in stock, and a new addition, the Generation2 folder in TITANIUM!!

2/4/25 - UPDATE !- Sold the Titanium folder, got another one in stock, and a White Bone handle folder. The Wood Handle folder is still on back order. The White Bone is on the web site .

5/28/24

I just received a new shipment of Oarsman Marine Tallow, both the Basic Kit and the Handistick. The formula has been improved slightly, as the previous owner has retired and his daughter has taken over the business. She’s the one that improved the process .Rowing season is here, so the new batch has arrived just in time. Full instructions are included. Check them out in the Shop Store.

4/23/25

Handi sticks are sold out, ordering more soon.

Just a reminder that I have a good stock of Ritchie Rowing Compasses ready to go for this season’s rowing. They are very handy for rowing in a straight line or following a set course. Available in the Old Wharf Shop Store.

2/20/24 - The new 2024 Old Wharf T-shirts are now available in the Shop Store. All sizes available, S to 2XL ( sorry, no Mediums left). Check them out!

1/20/24

Here’s a link to short piece written by Seth Rolbein last year - Check it out…

12/14/23

Just added to the Portfolio page- photos and the instagram link to my latest build, Nauset Marsh Skiff #5, finished at the end of August, 2023. Take a look…

10/31/23

It’s been a while for this, but I am finally posting a link to a video sort of about the 16’ Duck Trap Wherry I built last year. I built it for the owner of the company that makes marine plywood, using the plywood provided. It’s pretty interesting…

6/20/23

The Provincetown Independent, one of the last non-chain newspapers on the Cape, wrote a nice article on Old Wharf Dory- here’s the link. Check it out!

10/4/22

Boye Boat Knives Back in Stock!!

I just got 4 Boye Folding Boat Knives in stock, ready to go, 2-yellow sheepsfoot and 2- pointed tip blue. These are the best boat knives out there, verified by independent testing by Practical Sailor and others. If you want one, do not hesitate, they are hard to get. When these go, I don’t k now when I can get more stock.

2/9/22

Ritchie Rowing Compasses back in stock!

One of the best additions to your rowing vessel, makes it a lot easier to row a straight course! Here’s the link to the compass page.

Also, I am now the Wholesale Distributor for the Ritchie Rowing Compass, so please contact me directly if you would like to order compasses for resale.

12/30/21

Check out Launchings in the latest issue of WoodenBoat Magazine, Jan/Feb 2022, page 77. The boat in the lower right corner is a 20’ LYS, built by Roger in New Hampshire! Here are a couple more photos on the Skiff Scrapbook page…scroll down a couple of posts.

12/13/21- Found this commentary from 120 years ago…

11/12/21

New post on the Portfolio page, a recent build I call the Osprey. I had a request from a customer about a rowing boat for fly fishing, with a sliding seat, and provisions for fixed seat rowing for one or two. This is a difficult combination, as most sliding seat rigs are contraptions with a lot of parts sticking out , and they take up all the room in the middle of the boat. This makes a boat useless for fly fishing, and fishing in general because there is no room to stand, and in the case of fly fishing, the line would get caught on the rig in several places. Also, the boat would be difficult to convert to fixed seat rowing. Fortunately, I found a very nice, simple sliding seat made by Gig Harbor Boat Works that overcomes these problems. For the hull I knew I needed a flat bottom skiff for stability, so I chose John Atkin’s “George” as a base. This was one of John’s last designs, and he had one built for himself . This boat has a long waterline and wide flat bottom for stability. Because I was using a sliding seat, I stretched the boat 10%, going from 16’ to 17’6”, and kept everything else the same. I lofted the boat full size, and used Okoume Marine ply and clear fir for the hull materials, sheathing the exterior with 6 oz. fiberglass and epoxy, and coating the interior with epoxy. I added full flotation, and storage bow and stern. The sliding seat configuration called for longitudinal bulkheads to support the rails for the seat, so I also filled the spaces between the hull and the bulkheads with foam and decked them over. The longitudinal bulkheads gave me the clear open space in the middle of the boat needed for fishing, and the rails gave support for the fixed thwart aft. I also built a pair of 8’spruce oars and used Douglass oarlocks and Martinoli sleeves to go with the sliding seat. I think the boat came out great, and the customer is very happy. I did not get to row the boat as I finished it in the middle of the winter, and I have not been able to get to Rhode Island where the boat is used. I hope to get a couple of photos of the boat in the water, and when I do I will post them here. But for now , check out the build slide show on the Portfolio page.

Give me a call or email me if you are interested in this boat.

Next build was a stretch Gloucester Gull finished out very high end, I will post this one on the Portfolio page soon.

10/21/21

A new updated version of the U.S Coast Guard “Boat Builder’s Handbook” was released recently - here’s the link.

8/10/21 - Apple Pay is now available in the Boatshop Store!

You can pay for plans, knives, and all other items available in the store with ApplePay. It will come up on the checkout page automatically if you are using an Apple computer, tablet, or iPhone.

7/2/21- Here is a link to an article on the Lumber Yard Skiffs originally published in the paper magazine Small Boats 2008, now archived in the digital magazine Small Boats Monthly. The article was featured in a regular email communication from Small Boats Monthly, an on line magazine devoted to all kinds of small boats- row, power, and sail. Check it out!!

2/4/21 - Great article on the Savo 650 in the latest Small Boats magazine! Here’s a link to it, you may need a subscription to read it. I built both the Savo’s they have , the original 650D, Norppa, and the 650E , Mursu, that they rowed in the R2AK.

9/24/20

Some new photos on the Skiff Scrapbook page - I have been selling a LOT of LYS plans recently- thanks to all those who have bought plans. And there have been a few built from those plans, check them out!

6/5/20

A Blast from the Past ! Here’s a photo of me in front of my original shop on Bank St. in Wellfleet.It was probably taken around 1980 or so, by my wife’s cousin Jane or her ex husband . Her ex husband found it and sent it to her, who sent it to me. At that time I was building plywood prams, and selling 6 in the spring to the Goose Hummock Shop in Orleans. This was a pretty good order at that time, plus I also sold a few myself. I built about 50 of those prams, which I designed. 1/4” fir marine plywood of high quality was $25.00 a sheet, framing and thwarts were pine, weight was about 55 pounds. I don’t remember the price, around $150 I think. I built 2 a week, not bad money in those days.

At my original shop on Bank St. in Wellfleet, prams for sale…

5/8/20

On lighter note, Tyler Fields has finished the first part of a video he and Woody Metzger started over a year ago, asking several local boat builders and marine related craftsmen 4 questions :

1 -Why has your business survived and where do you see it going? 2- What would you do if you weren’t doing this? 3- Would you like to see your kids do this? 4- Do you love your job?

Tyler finished the response to the first question, and here is the link to the YouTube video . It was a lot of fun making this video, and I am honored to be one of the chosen craftsmen.

4/6/20

Rowing season will be here soon, it’s already here for some. We have a few items for rowers the Shop Store, such as Tallow (both full kits and Handy Sticks), Ritchie Rowing compasses, 3 fathom Utility lines, both 3/8” and 1/2”, Boat knives in several price levels, hats and shirts - Sun Protection! Social distancing is easy out on the water…

3/2/20

Well, February is over- not too bad, very mild. Here’s a link to a podcast interview I did recently with Tony Davis, owner of Arey’s Pond Boat Yard. Tony is doing a series of podcasts for the Cape Cod Maritime Museum, the series is called “Maritime Musings”. Mine is the second episode, check it out!

Just in case , here’s a link to the soundcloud page. You may need an account to listen directly from this page.

1/9/20

Just posted some new photos of the current build, a 16’ LYS for a commercial fisherman in Barnstable. Here is a link to my Facebook page.

Also, I will be posting some photos of an Atlantic 17 rowing craft, designed by Jon Persson ,that I am building for myself! This series of photos will be posted on the On Rowing page.

10/17/19- Richie Rowing Compass back in stock!

10/15/19

I have added a short slide show to the Portfolio Page of the LYS I built last winter for a researcher at WoodsHole. It shows some construction photos, and some of the boat in the water. They did a nice job of finishing the boat out.

10/1/19

The 7th Annual Wellfleet Rowing Rendezvous was held on 9/21/19, and it was a great success! It was a beautiful day, with about 80-100 people, and 21 boats. Here’s a link to a photo album on my facebook page.

8/29/19

End of Summer Boat Sale-10% off all boats on the Boats for Sale Page ! Check it out!!

New in the Shop Store-The Spyderco Salt 2 . This knife is one of the best folding knives for use on small boats in salt water. The blade is made from H1 non rusting steel, and is available in plain or serrated edge . More info on the Boat Store page

6/24/19

They Did It !!

Team Backwards AF finished the R2AK yesterday afternoon, the only human powered vessel left in the race. Hearty Congratulations to Leigh and Dameon for this amazing feat. Here is the link to the latest post. Lots of posts on the Facebook page…

6/21/19 - I have been posting updates on the R2AK on the facebook page. Their latest position, as of 21 June, 05:46 Alaska time, has them about 112 miles from Ketchikan, about 80% of the race completed. I think they are doing great! Check out this post of them rowing…

Here’s a link to their latest post…

And here’s a link to the build album…

And a couple of photos of Mursu leaving the shop….

6/5/19- The rowers in Mursu have completed the first leg in the required time, and are in Victoria , BC, getting ready for the next big leg! Here is a link to the latest post. Stage 2 of the Race starts June 6, at 12 noon.

5/30/19

Update on the Race To Alaska. The Savo 650 that I built for the race has been named Mursu, which is Finnish for walrus. The owners have finished the boat, including decking the compartments fore and aft, fitting hatches, adding the sliding seat rig, making oars, paint, etc, etc. They have planned, bought and packed their food and gear. The boat is well on its way to Port Townsend, the start of the race. They have been updating their web site, here is a link to the most recent post.

Here’s to wishing them the best of luck in the race! Follow on the tracker on the Race web site . The Race starts in less than 3 days, June 3 at 5 AM!

5/21/19

Here are a couple of photos of the Spring Rendezvous held this past week-end. The weather was great, we had about 10-12 boats, and a lot of good people rowing them.

Well, the Savo 650D/R2AK is done, my part anyway, and is in Maine being finished up for the race. Final photos are up on the Facebook page. Here is a link to their web page, Rowing to Wild. A couple of photos are below. Next project is assembling a Northeaster Dory kit from Chesapeake Light Craft, for a lady from Provincetown. The Northeaster is a great rowing boat, tried one out at last year’s Wooden Boat Show.

2/22/19

Some new stuff on the “OnRowing” page…

2/13/19

Just received this comment from an LYS builder- Dale, from Indiana:

Walter, Thank you for such I wonderfull set of skiff plans. I grew up fishing Jersey lobster and have commercially fished both east and west coasts. Along with 8 years in Alaska. Having retired from commercial fishing 11 years ago and moving to the Midwest, I still always wanted to build a skiff from scratch . Well that’s done and I thank you . I get many compliments on what nice lines this simple skiff has!!! It was a wonderfull and fulfilling project! I’ve fished a lot of boats and there is just something classy about a boat with lines. So many boats built today just don’t have any. Your skiff is simple but when properly built you can sit back and truly enjoy “ the lines” 

Thanks, Dale!

1/31/19

Next project is another Savo 650D, for the same people who own the first one. This boat will be a little different, the plan is to use it for long distance expedition style rowing. So it will be reinforced in several ways - exert frames, abrasion protection, decks bow and stern for storage and flotation, etc. They have already rowed the Maine Island Trail in the original Norrpa, here is a link to a story about the row. The title is “A Feast of Adventure”, by Leigh Dorsey. Also, she did an online presentation called “Rowing to Wild”, both very interesting. So they have some experience rowing distances, this should be an interesting boat.

1/29/19- Progress on the 16’ LYS-The boat is finished, and has been loaded onto the owner’s trailer and taken to her new home.

12/4/18

Next Project - a 16’ LYS , to be used as a research vessel at Woods Hole…

I have started a build album on Facebook…

11/21/18- Check out the ash coffee table I have for sale on the Boats For Sale page ! Scroll down to the bottom.

11/8/18

Check out the photo album of the recently completed Nauset Marsh Skiff. This is the 4th NMS that I have built, looks pretty good. Options on this boat include a casting deck with storage under, console with gas tank storage under the seat, floorboards/cable chase, and hinged aft seat. Power is a 30 HP Evinrude E-tec motor.

10/3/18

Thanks to all who made the Rendezvous a great success ! We had beautiful weather, about 15 boats including a 6 oared gig, 2 traditional Banks dories, a CLC Northeaster dory rowed in from Orleans (and back later in the afternoon!), and many more interesting boats. Here’s a link to a short video on YouTube, and here‘s a link to some photos on facebook.

10/11/18 - Just posted another video from the Rendezvous, aboard the Cornish Pilot Gig. It’s in several places including here on the On Rowing page, the Old Wharf facebook page, and youtube!

8/27/18

Another new item in the Boatshop Store!

I have added a 3 Fathom utility/dock line to the inventory. It is made of 3/8" Hempex synthetic 3-strand line, and is 18' long, with a 12" hand worked eye splice on one end, and a needle and palm whipping on the other. A nice addition to any small boat's gear.

8/7/18

Just got in a new batch of Oarsman Marine Tallow  Kits, for your oar leathers, and anything else that squeaks while you  row...

6/11/18

New Item added to the Boatshop Store!

I have added the Mora Clipper Companion F, one of the best inexpensive knives for small boat use. Read more about it, and order one here.

 4/17/18

The next project is another Nauset Marsh Skiff. I will not be documenting the build, since I just did that on the Old Wharf Facebook page . This one will be very similar, same hull , side decks, console, but with a casting platform forward and one aft of the console. The aft one will fold up for access underneath. I will try to post some stuff from the archives, including Lumber yard Skiffs built from plans. Meanwhile, don't forget the Adirondack Guide Boat I have for sale . There will be a spring price reduction- check  it out!

10/2/17 - Next Project-

...Is building another Nauset Marsh Skiff like the one in the slideshow above. This one will stay on the Cape, the owner is from Chatham. I will be posting photos of the build on the Facebook page, and some here also. Here's a recent photo...

10/25/17- I started the build album on Facebook...

3/27/18- The boat is finished, and out the shop door. I brought it to a local marina for motor installation and rigging. The owner has seen the boat and is very pleased.

Old Wharf Dory Co. is the Official US Builder of Puuvenepiste rowing boats, including the race-winning Savo 650 and 575.

6/20/17

Don't forget that I have a great Pat Brown Adirondack Guide Boat for sale on the Boats for Sale page...

This year, 2017, is the 40th Anniversary of Old Wharf Dory Co. 

I started building boats in 1977, in my yard in South Wellfleet. I still have the second boat I ever built, an 8' Pram designed by John Gardner, from the pages of the old National Fisherman. I just refinished it, a photo is below. I have built over 165 boats, ranging from 6'6" to 35'. During that time I was also a carpenter, commercial fisherman, and timber framer. Be on the lookout for some special goodies to celebrate 40 years of boat building including T-shirts, hats, etc. Thanks to all my customers over the years, you all have excellent taste in boats!

11/11/16

My Next Build - 

               is an 18' Work skiff I designed around 1984 or so. It is wide and low sided, so it sits nicely on the flats at low tide, and is easy to get in and out of. The low sides also make it easy to load and unload gear, bags of shellfish, etc. This boat will replace a 30 year old boat I built in 1986. Here's a link to the photo album.

LOA - 18'0", Beam to inside planking, 7'1", Beam inside at chines, 6'0", Depth amidships, 1'8".

1/16/17 - The 18' Work Skiff is finished. Here's a link to the Facebook album, and a photo of the finished boat-

8/4/16

Next project is building a Savo 575 race boat. Photos soon.

11/11/2016

The Savo 575 is finished, photo album here.

The Sinne 610 is finished and on the trailer. I will cover her up until the owner comes to pick her up. But first, as soon as we get some good weather- SEA TRIALS! 

5/27/16 - Sea trials have been done, and are posted on the On Rowing page.

Now, on to the next project- repair of a 17' Gardner/Herreshoff  style rowing boat that got damaged in a recent storm. 

More photos in the Facebook album...